Quote:
The new Dynasty tank is one of the lightest and most adjustable air systems to ever hit the paintball market. The ANS adjustable regulator with Inocom tank gives you the perfect mix of a light and compact system with the adjustability you need. The regulator adjusts your output pressure from 850 to 450 or even 650 PSI!
The 68CI complete system weighs in at only 2.36 pounds and is a total length of 11 inches. This tank and regulator combination is designed so well and durable that you will receive a FULL 5 Year Manufacturer Warranty Direct Through ANS. Let’s see someone else stand behind their tank like that! The bottle is also certified for 5 years which means you have a while before you need to even think about hydro testing.
Our unique TC and DOT approved tank caters to both the US and Canadian players. Our goal was not only to bring the best paintball tanks to United States, but to Canada as well. The TC/DOT stamp on this tank allows it to be filled under both United States and Canadian regulations.
The ASTM compliant regulator is proud to be machined, tested and assembled in the United States. This easily serviceable regulator features a durable brass bonnet to eliminate wear or chips on the threads of the tank. The regulator comes with a standard output of 850 PSI but can easily be changed to either 650 or 450 PSI. The blackout system comes with unique all black fittings which include a black gauge, fill nipple and burst disks.
ANS has gone above and beyond the safety standards of the industry to bring you the safest paintball regulator to ever hit the market. The one piece burst disks are all ASTM compliant, DOT guideline assembled and DOT guideline tested. The regulator stem has multiple 3 pressure releases which takes the safety of the system to the next level. First, we have two pressure release grooves on the regulator stem designed to release air pressure from the bottle if it would ever start to unscrew. Second, we have a unique bleed hole in the regulator stem which will allow the tank to safely vent in case of any mishap. Finally there is a restrictor at the base of the regulator to ensure the regulator can be safely removed from the tank.
The regulator is built with all urethane o-rings to ensure long life on all seals and moving parts. The blackout gauge has a pressure fit snubber to protect the gauge from rapid fill and has a safety bleed hole to ensure the safety of the overall tank. The blackout fill nipple is hardened to ASTM standards and has been plated to resist corrosion and wear.
Each complete air system goes through rigorous testing to ensure they meet both DOT and ANS quality and performance standards. To start, each regulator is assembled and tested with 4500 PSI of air and checked for leaks. Then the regulator is assembled to the cylinder with OEM application sealant equipment. Each cylinder is both torque tested and reverse torque tested to ASTM break away torque requirements.
This complete air system gets an average of 1200 shots per full fill depending on the gun, the way it is setup and the output pressure of the tank. The shot average has been calculated by measuring the total number of shots attained by running an array of markers with stock manufacturer settings.
Features
Full 5 Year Manufacturer Warranty
Lightweight & Compact Inocom Bottle
Adjustable Regulator (450, 650 & 850 PSI Outputs)
Change Your Regulator Pressure In Under 20 Seconds
Only 11 Inches Total Length
Weighs in at Only 2.36 LBS
14in Bottle Circumference
Blackout Parts (Black Gauge, Fill Nipple & Burst Disks)
About 1200 Shots Off A Full Fill
DOT & TC Approved (Good For Both US & Canada)
Compatible With All Paintball Markers
Free Aluminum Dust Cap
Regulator is ASTM compliant to F2030, F2653-07, F1750-05
5 Year Bottle Hydro
No comments:
Post a Comment